Cut a 13 cm 51 in wide by 56 cm 22 in long strip of. Stand the easel up and open the legs wide enough so that the ends of the side brackets are flush with the ends of the cross braces.
How to make an easel creating a cardboard easel cut 2 strips of cardboard 56 cm 22 in long by 64 cm 25 in wide.
How to make an easel for painting.
How to make an easel.
The little artist in your family will love their own easel or mounted chalkboard to create their masterpieces and an easel makes a perfect stand to display a prized piece of artwork.
Cut the two front legs 2065mm 82 38 long.
Cut 4 8 squares of cardboard that are 32 cm 13 in each.
I know i know.
The cross member should now be attached to the two legs.
A 6 foot 1 x 2 select pine wood.
With these advanced plans you can build a sturdy and substantial easel for an art studio in both freestanding and table top designs.
The easel consists of three legs which are connected on top with a piece of rope.
The other 4 parts can rotate and snap into place by a smal screw which fits in a hole.
Align one of the pilot holes with the cross member mark on the front leg of the easel.
Words on paper or screen are not always very clear.
Mark the legs through the two holes in the bracket the pilot hole and the slot hole.
2 small eye boltsscrews.
Drive a 2 inch long screw through the other pilot hole on the cross member and into the other leg.
Measure 1950mm 78.
Angle cut the tops 150 as shown in the drawing.
Create 2 tabs and glue them together for support.
Drive a 2 inch long wood screw through the pilot hole and into the leg.
Small chain or rope.
Small piece of 716 threaded rod steel rod 2 716 cap nuts.
No comments:
Post a Comment